Tumblelog by Soup.io
Newer posts are loading.
You are at the newest post.
Click here to check if anything new just came in.

August 11 2013


Alloy Wheel Refurbishment


Renovating alloy wheels. They need many more looking after although alloy wheels look much better than your average metal wheel. Wind, rain and grit can hit the top of the alloys, brake dust can also get into the surface to ruin your alloy wheels. Another point that can spoil the look of an alloy wheel is impact damage. Just slightly scuffing the kerb can give your alloys a tough looking edge.

Then use a little grinding rock, a steel brush or possibly a flap wheel on a drill to smooth this out, if there's any moderate impact damage. Take away the minimal amount of metal potential and once you have got the region looking pretty smooth again you might need some rubbing compound. The wheel will have to be polished, once most of the effect damage and corrosion has vanished. Locate the right Alloy polish available from most good car accessory stores. Use tons of elbow grease to truly get your wheels to as high a radiance as you can. Use a non-fluffy rag to use the polish and then utilize a smooth fabric to buff it up. The following phase will be to give the wheels a relacquer with clear coat lacquer by means of a narrow paint brush to employ it. All should be available from most accessory stores and your wheels should look just like new.

There are two ways of refurbishing alloy wheels. One way will be to allow the experts do it, or if the harm is simply cosmetic the fixes can be carried out at home with just a bit of elbow grease and a few tools. It is simpler to work with alloy wheels when they're off the car. The first job is to hide up the tyres and any painted areas with paper and masking tape on areas that you don't need to be impacted. Most alloy wheels have a lacquer finish and this lacquer will typically have to removed first. Then the rest of the lacquer can be taken off with some kind of paint stripper. Take the normal precautions to avoid the stripper coming into contact with the skin. After http://www.mintalloys.co.uk/full-alloy-refurbishment-process.html the lacquer has been removed, use somebody rubbing compound with a moist cloth to disguise any little pitted areas. You might need to also use some fine grade wet and dry paper to eliminate any intense corrosion.

Don't be the product, buy the product!